A family-run firm from Austria with a workforce of 220 employees, KATZBECK has manufactured bespoke windows and doors made of wood and wood/aluminium for over 65 years. KATZBECK products stand for first-rate design, innovation, outstanding quality and green production processes.
KATZBECK is your competent and capable partner in all stages of door and window production, from consulting and planning, to manufacture and installation.
Open your senses and find inspiration for your home. Select from a broad range of models, colours and forms; create precisely the atmosphere in your ‘four walls’ that best suits your style. Visit our headquarters and production facility in Rudersdorf or one of our eight window studios in Austria.
3. Check the position of
3. Check the position of the shaft. The marker (1) has to correspond to the edge when the sash is opened 90°. 4. Remove the visible part of the center fixation (1). If the center fixation is missing, check the vicinity of the rebate and the corner bearing and remove the loose part. 5. Remove the mounting aid (1). 6. Check the gap of the rebate vertically and adjust to 12.5 mmm if necessary. Please see following instructions for height adjustment Adjustments: The side and contact pressure settings remain the same Height adjustment: IMPORTANT NOTE: height adjustment may exclusively be consucted at the load transfer and never at the corner bearing! In order to prevent any faulty adjustments, a safety pin (included in shipment) has to be mounted in the height adjustment screw of the corner bearing. 32 KATZBECK-MANUAL
17. Operating PPS (Parallel-Placed-Sliding-Components) Parallel position for the permanent ventilation of the room Open / Slide (ventilation position) Closed position for when the room is unattended for long periods or when no ventilation is desired. 18. Adjustmenst PPS (Parallel-Placed-Sliding-Components) Only authorized licensed professionals are permitted to perform the remounting and unhinging, as well as adjusting the fittings! Horizontal adjustment of sash: Parallel adjustment of rails: KATZBECK-MANUAL 33
