vor 3 Jahren


  • Text
  • Product
  • Warnings
  • Installation
  • Information
  • Settings
  • Handbook
  • Manual
  • Fittings
  • Sash
  • Katzbeck
  • Glazing
  • Winfix
  • Components
  • Aluminium
  • Optima
  • Vario
  • Maintenance
  • Screws
A family-run firm from Austria with a workforce of 220 employees, KATZBECK has manufactured bespoke windows and doors made of wood and wood/aluminium for over 65 years. KATZBECK products stand for first-rate design, innovation, outstanding quality and green production processes. KATZBECK is your competent and capable partner in all stages of door and window production, from consulting and planning, to manufacture and installation. Open your senses and find inspiration for your home. Select from a broad range of models, colours and forms; create precisely the atmosphere in your ‘four walls’ that best suits your style. Visit our headquarters and production facility in Rudersdorf or one of our eight window studios in Austria.

Furthermore, the

Furthermore, the following points have to be observed for the use of glazing blocks and glazing itself: • The width of the blocks has to measure at least the width of the entire glazing package and needs to support it all-over. RICHTIG RIGHT FALSCH WRONG FALSCH WRONG FALSCH WRONG FALSCH WRONG • Any protrusion of sealing material must be removed in the area of the blocks (load bearing and spacing blocks) in order to facilitate a holohedral bearing edge of the blocks. • Generally, the space between the blocks and the edges of the glazing should measure approx. one block length. The spacing of fixed glazing weighing more than 100 kg should measure a max. 150 mm from the middle of the blocks to the corners of the glazing. • A second block with a thickness of 1-2 mm less than that of the load bearing block has to be inserted if the weight of the fixed glazing exceeds 100 kg. • Only sealing material delivered by KATZBECK or confirmed in writing may be applied exclusively, in order to guarantee the compatibility of materials. • The load bearing blocks have to be located approx. in the center above the roll axis of the double castors for lifting-sliding windows and doors. • The position of the blocks has to be secured permanently; blocks may not impede or prevent the vapor pressure compensation. • The suitable glazing rebate bridge has to be inserted and secured with a screw against sliding for glazing of the following systems: LINEA, LINEAflat and wood aluminium lifting-sliding doors. • Use the slanted support blocks underneath the load bearing blocks for fixed components of wood aluminium lifting-sliding doors. 56 KATZBECK-MANUAL

36. Glazing Guidelines of KATZBECK Systems Systems glazed from the INSIDE via the glass strip: MASSIVA und MASSIVApassiv COMBINA und COMBINApassiv opening fixed opening fixed öffenbar Fixteile öffenbar Fixteile DESIGN Fixteile LINEA und LINEAflat Fixteile DESIGN fixed Fixteile LINEA und LINEAflat fixed Fixteile 1) 1) 2) 2) Isolierglaselement in den Rahmen Glasfalzabdichtung mittels Glasleistenfüller into umlaufend Seal Glasfalzabdichtung einheben Insert insulating und gem. glass Verklotzungsrichtlinien einheben verklotzen. und gem. Verklotzungs- durchführen. füller umlaufend und luftdicht component in den Rahmen und the luftdicht glass rebate all around mittels air tight Glasleisten- via the richtlinien the frame and verklotzen. chock acc. to the wedge filler Material: Ottoseal durchführen. of the glazing strip. Material: Ottoseal S112 S112 Material: Ottoseal S112 guidelines. KATZBECK-MANUAL 57

© Katzbeck FensterGmbH Austria
A-7571 Rudersdorf, Teichweg 6